Your shopping cart is empty!
LM386 Amplifier Module
Product Code: C386-1
Price:$12.95
5 or more $5.70
10 or more $5.40
20 or more $4.80
10 or more $5.40
20 or more $4.80
Qty:
- OR -
Add to Wish List
Add to Compare
Add to Compare
Based on the popular LM386-1 audio amplifier, this tiny PCB module can provide up to 300mW of audio power. Easily configured for either 20 (26dB) or 200 (46dB) gain.
Features:
- LM386-1 chip
- Gain of 200, easily changed to 20 by removing one SMT part
- Terminal block for connecting a speaker
- 10K variable resistor for adjusting audio gain
- LED power indicator
- Operating voltage: 4 ~ 12V
- Board size 41 mm x 13 mm (1.6" x 0.5")
Imported from China.
| General Information | |
| FAQs | Q: How do I reduce the amplifier gain? A: Pins 1 & 8 of the LM386 amplifier chip are used to set the amplifier gain. If they are left open (unconnected), the gain is set by an internal resistor to 20 (26 dB). If a 10 uF capacitor is connected between pins 1 & 8 the internal resistor is bypassed, and gain is set to 200 (46 dB). An external resistor can be used to set the gain anywhere in between. This module has a capacitor and a zero Ohm resistor in series between pins 1 & 8, so the gain is set to 200. If you need lower gain (in other words, a less sensitive amplifier) you can un-solder the zero Ohm chip resistor R1, or simply clip it in half with a small pair of diagonal or flush cutters. Just be careful not to damage the other components on the board. |
| Specifications | |
| Inputs |
|
| Outputs |
|
| Power requirements | DC 4 to 12 Volts, regulated |
| Controls & Indicators | Input attenuator: 10K trimmer potentiometer
Power: Red SMT chip LED |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
HamGadgets © 2024